- 132 -
GPS/Sensor
GPS Logs
Applicable modes:
Location information acquired in the GPS positioning is recorded continuously as a GPS log.
•
GPS logs are not recorded to the built-in memory. Please use the card.
1
Select [GPS Log] on the [GPS/Sensor] menu, and then press [MENU/
SET].
2
Press 3/4 to select [Log Record], and then press [MENU/SET].
• The message is displayed. Press [MENU/SET], and perform the operation of step
8
in
“Setting Date/Time (Clock Set)” (P28). (first time only)
3
Set [Recording interval] and [Recording duration].
4
Press 3/4 to select [Start] and then press [MENU/SET].
• [ ] is displayed while recording.
∫ End recording GPS log
1 Select [GPS Log] on the [GPS/Sensor] menu, and then press [MENU/SET].
2 Press 3/4 to select [Log Record], and then press [MENU/SET].
3 Press 3/4 to select [End], and then press [MENU/SET].
•
GPS log recording will end in the following case.
– When the remaining battery power becomes [ ]
• In the following cases, the file will be divided.
–Changing the date
–Changing the [World Time] area (time zone)
Record GPS Logs
[Recording
interval]
[60 SEC.], [30 SEC.], [15 SEC.]
• Depending on the radiowave reception conditions, log recording intervals
may be longer.
[Recording
duration]
[ENDLESS], [48HRS], [24HRS], [12HRS], [6HRS]
• To continue recording a log without setting an end time, set to
[ENDLESS].
To Next Page
Loading...
Need help?
General
