- 28 -
Preparation
Setting Date/Time (Clock Set)
• The clock is not set when the camera is shipped.
1
Press camera [ON/OFF] button.
• If the language select screen is not displayed, proceed
to [Requirements for Underwater use] below.
2
Press [MENU/SET].
3
Press 3/4 to select the language, and press [MENU/SET].
4
Press [MENU/SET].
5
Press 2/1 to select the items (year, month,
day, hour, minute, display sequence or time
display format), and press 3/4 to set.
A: Time at the home area
B: Time at the travel destination
•
You can cancel without setting the clock by pressing
[Q.MENU/ ].
[Requirements for Underwater use]
Be sure to check this so that you can maintain the waterproof performance.
[Please set the clock] is displayed after viewing the last screen.
For details, refer to P11.
To Next Page
Loading...
Need help?
General
