- 103 -
Recording
∫ About [š] ([Face Detection])
The following AF area frames are displayed when the camera detects the
faces.
Yellow:
When the shutter button is pressed halfway, the frame turns green when
the camera is focused.
White:
Displayed when more than one face is detected. Other faces that are the same distance away
as faces within the yellow AF areas are also focused.
•
Under certain picture-taking conditions, including the following cases, the face detection function
may fail to work, making it impossible to detect faces. [AF Mode] is switched to [ ] ([Ø] while
motion pictures are taken).
– When the face is not facing the camera
– When the face is at an angle
– When the face is extremely bright or dark
– When there is little contrast on the faces
– When the facial features are hidden behind sunglasses, etc.
– When the face appears small on the screen
– When there is rapid movement
– When the subject is other than a human being
– When the camera is shaking
– When Digital Zoom is used
– Taking pictures underwater
• If the camera is registering something other than someone’s face, change the settings to something
other than [š].
To Next Page
Loading...
Need help?
General
