- 161 -
Others
• Is there any memory remaining on the built-in memory or the card?
> Delete the pictures which are not necessary to increase available space in the memory.
(P37)
• You may not be able to record for a short while after turning the power [ON] when using a large
capacity card.
• The picture can become whitish if there is dirt, e.g. fingerprints on the lens.
> If the lens is dirty, turn on the camera, eject the lens barrel and gently wipe the lens surface
with a soft, dry cloth.
> Check that the exposure is correctly compensated. (P88)
• Setting the [Min. Shtr Speed] to faster speed might make the picture darker.
> Set the [Min. Shtr Speed] (P90) to slower speed.
> Set [Auto Bracket] (P89) or [Burst] (P92) of the [Rec] menu to [Off].
Recording
The picture cannot be recorded.
The recorded picture is whitish.
The recorded picture is too bright or dark.
Multiple pictures are taken at one time.
To Next Page
Loading...
