Others
- 168 -
• Is it connected properly with the HDMI mini cable (optional)? (P130)
> Confirm that the HDMI mini cable (optional) is firmly fitted.
> Press [(] on this unit.
• Is the [VIERA Link] on this unit set to [On]? (P49)
> Depending on HDMI terminal of the TV, the input channel may not switch automatically. In
this case, use the remote control for the TV to switch input. (For details on how to switch
input, please read the operating instructions for the TV.)
> Check the VIERA Link setting on the connected device.
> Turn the power to the unit off and then back on again.
> Set [HDAVI Control] to [Off] on the TV and then turn it back to [On]. (Refer to the operating
instructions of the TV for details.)
> Check [Video Out] setting. (P49)
• Is the camera connected to the PC correctly?
• Is the camera recognised by the PC correctly?
> Set to [PC] in [USB Mode]. (P48, 140)
> Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
> If there are two or more USB terminal on a single PC, try connecting the USB connection
cable to another USB terminal.
> Check if your PC is compatible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
> A message prompting to format the card may be displayed when connecting, but do not
format.
> If the [Access] displayed on the LCD monitor does not disappear, disconnect the USB
connection cable after turning off the power.
VIERA Link does not work.
The picture cannot be transferred when the camera is connected to a PC.
The card is not recognised by the PC. (The built-in memory is recognised.)
The card is not recognised by the PC. (SDXC memory card is used)
To Next Page
Loading...
Need help?
General
