- 169 -
Others
> Confirm that the login information (login ID/user name/email address/password) is correct.
> Confirm that the PC is connected to the Internet.
> Confirm that resident software such as virus protection software or firewall is not blocking
access to YouTube or Facebook.
> Confirm with YouTube or Facebook as well.
• Pictures cannot be printed using a printer that does not support PictBridge.
> Set to [PictBridge(PTP)] in [USB Mode]. (P48, 144)
> When using a printer with a Cropping or borderless printing function, cancel this function
before printing. (For details, refer to the operating instructions for the printer.)
> When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can
be printed.
• Since aspect ratio of a panorama picture differs from normal pictures, it may not always be
possible to print it correctly.
> Please use a printer that supports panorama pictures. (For details, refer to the operating
instructions for the printer.)
> We recommend using the “PHOTOfunSTUDIO” software on the CD-ROM (supplied) to
adjust the size of the still picture to the print paper size.
> Touch [ ], select the [Setup] menu icon [ ]. Then select [~] to set the desired
language. (P51)
• In dark places, the AF Assist Lamp lights red to make it easier to focus on a subject.
• Is [AF Assist Lamp] on the [Rec] menu set to [On]? (P94)
• The AF Assist Lamp does not turn on in bright places.
• The surface of the camera may become warm during use. This does not affect the performance
or quality of the camera.
There is a problem trying to upload to YouTube or Facebook.
The picture cannot be printed when the camera is connected to a printer.
The ends of the pictures are cut at printing.
The panorama picture is not printing correctly.
Others
An unreadable language was selected by mistake.
A red lamp sometimes turns on when the shutter button is pressed halfway.
The AF Assist Lamp does not turn on.
The camera becomes warm.
To Next Page
Loading...
Need help?
General
