121
If you are familiar with using tone curves you can
adjust highlight, shadow and mid-tone with the curves
dialog screen.
Or you can use the presets available under the
contrast setting.
If you think the white balance needs adjusting, again either use the auto
or manual control to do this.
Manual White Balance adjustment
White balance has already been set by you (or auto by the camera) so
you can only make relative adjustments here. However it is good for fine
tuning or adding a color tint to the image.
The final adjustment you may want to make is
sharpening.
Again the results are previewed on screen.
All that remains is to click Development to
save the file either over-writing or re-naming
it.
To Next Page
Loading...
