Sunpak PZ42X (Canon unit) used
here in manual mode. Set the
iso/aperture to match the camera
settings and the unit will auto
expose at this level.
Wireless Flash Triggers
If you have a flash gun with a high guide number and other useful
features like bounce/swivel but it has a high (more than 30v) trigger
voltage it might be cost advantageous to purchase a wireless trigger
system. Very cheap units are available if you do not have a lot of use for
a more professional set up.
Such a unit is shown below and can be used to trigger multiple receiver
units to allow some complex lighting set ups to be constructed using
multiple flash units.
Wireless flash trigger receiver and
transmitter unit.
Receiver attached to a powerful Vivitar
283 flash unit with a 260 volt trigger.
The units work over quite a large range (50 metres outdoors). As with
Transmitter fits
on camera hot
shoe
To Next Page
Loading...
