127
Exposure Bracketing (Auto Bracketing)
The use of exposure bracketing allows us to make a series of exposures
with a pre-set level of over and under exposure. It is useful in situations
where we haven’t the time to keep dialling in, or out, exposure
compensation. It gives us a little insurance against metering errors. In
some instances we can use the 3
images produced to create a single
exposure with increased dynamic
range, often referred to as a HDR
image. The amount of over and
under exposure is set in the Auto
bracket menu.
Once the auto bracket screen is displayed, by using the back control
dial,or the navigation buttons ◄►, the amount can be pre-set (up to +/-
3 EV or F-stops).
Use Select to save and exit from the setting option.
Now when you press the shutter the camera will automatically make 3
exposures in the sequence of 0EV –EV +EV.
You can evaluate the images and keep the best exposure, if you are not
combing them into a HDR image.
To Next Page
Loading...
