147
Custom Setups
One of the most useful additions to the camera setup options is the
ability to create, and use, “custom setups”.
The custom setups allows you to define and recall specific setups you
might want to make for your style of photography.
There are 4 setups you can make:
C1- this is directly accessible just by turning the mode control dial to the
C1 position.
C2-1, C2-2 and C2-3 are accessed by turning the mode control dial to
the C2 position and then selecting the C1, C2 or C3 setup.
To use your presets, you first make all the changes you want in the
menus, and then these can be saved as the settings for your selected
mode.
The C1 and C2 preset custom modes
give you the rapid ability to select a set of
known setup conditions so you can
quickly shoot a scene without having to
scroll though all the menu items to make
sure everything is set the way you want
it.
Setup all the parameters you want to
store and then select Cust Set Mem,
then navigate right ►to select which
preset setting to use. To use the settings
just select C1 or C2 from the mode
control dial.
Most of the main settings for the camera can be stored in the Custom
profiles. Photostyle, aspect ratio, image quality, metering mode, focus
mode, focus style, ISO, exposure value compensation, i.Dynamic,
i.Resolution, digital zoom and auto bracket exposure.
Values for Aperture and Shutter speed cannot be pre-set as they are
used in other setups. If you want a specific variation for a photostyle
save this first as the “custom” photo style and then set this as the
photostyle in your defined Cust Set Mem profile.
To Next Page
Loading...
