66
To create the central band of sharpness you need to press the Fn3
(function 3) button adjacent
to the navigation buttons. This opens a
display where the vertical (for landscape images), or horizontal (for
portrait images) position of the band can be set using the navigation
buttons ▼▲ for landscape mode and ►◄ for portrait mode. The back
control dial adjusts the width of the band. If you press the DISP button the
original positions are restored. The image may take a while to process in
the camera after the shutter has closed, especially if the image size is
large.
Soft focus - the image effect control adjusts the amount of soft focus blur
applied to the image.
Star filter - with this filter enabled any highlights are transformed into star
effects. The image effect control adjusts the length of the highlight points
from short to longer.
One point color - with this effect you can select the color that is to be
retained in the black and white image which is generated. Use the Fn3
button to display the setting screen. Align the small central frame on the
color you wish to retain in the image and then press MENU/SET. Some
colors may not be totally removed and areas of similar tone may be
removed. The image effect control adjusts the saturation of the remaining
color.
Examples of Creative Control Effects
Images using the expressive control features
Expressive color low Expressive color high
To Next Page
Loading...
