On page 2 of the set up menu we have seen the functionality of the
function buttons and the option to program the lens side lever as either
focus or zoom.
The LCD Display option allows users to customise the way the LCD
screen is calibrated. It allows the Brightness, Contrast/Saturation and
Color tints to be adjusted if you feel the display does not accurately
match the illumination of the subject.
However if you adjust this too far from its default you may begin to make
adjustments for exposure which are being biases by this display offset.
LCD Display style, data in border
The LCD Mode allows the brightness of the LCD display to be controlled
by the ambient light levels or switched to a low or high intensity mode.
The high intensity mode is useful if using the LCD in bright sunshine.
The EVF and LCD Display Styles allow you to set the way that exposure
and other displayed information are presented. It can either be
superimposed on the lower part of the image or in a black border at the
bottom of the image. The superimposed view gives you more image
size to evaluate focus etc.
To Next Page
Loading...
