199
If you never reset the numbering sequence it gives an indication of the
number of exposures that you have completed with the camera.
The camera starts numbering from 100-0001 so after each 1000 images
the folder number will increase to 101-0000 and so on.
My present image sequence is 119-0005 which means the camera has
taken 19,005 images in its lifetime.
The folder number can be assigned between 100 and 999.
When the folder number reaches 999, the number cannot be reset.
To reset the folder number back to 100, format the built-in memory or the
card first and then use this function to reset the file number.
A reset screen for the folder number will then appear. Select [Yes] to
reset the folder number.
The Reset option on page 6 is a way of reverting the camera back to
factory defaults for the REC mode and the SET UP menu items.
The option has two parts, the REC mode where all the settings are
restored to default, apart from time and date and the Folder/File number.
The second is the Set up parameters which include the Custom memory
profiles, face recognition and the Lens resume settings.
The USB Mode - allows you to “Select On Connection” either a PC or
PictBridge(PTP)]if you connect to a printer supporting PictBridge.
PictBridge(PTP): Set before or after connecting to a printer supporting
PictBridge.
PC: Set before or after connecting to a PC.
To Next Page
Loading...
