13. Others
406
∫ About 3D recording
With the 3D interchangeable lens attached, do not record a subject at less than the
minimum focus distance.
•
The 3D effects may be more pronounced, and therefore cause tiredness or discomfort.
• When the 3D interchangeable lens (H-FT012: optional) is used, the minimum focus distance is
0.6 m (2.0 feet).
When recording with the 3D interchangeable lens attached, be careful not to shake
the unit.
•
Tiredness or discomfort may result if the shake is pronounced, due to riding in a vehicle or
walking etc.
• We recommend using a tripod.
Do not leave the card where the temperature is high, where electromagnetic waves
or static electricity are easily generated or exposed to direct sunlight.
Do not bend or drop the card.
•
The card may be damaged or the recorded content may be damaged or deleted.
• Put the card in the card case or the storage bag after use and when storing or carrying the
card.
• Do not allow dirt, dust, or water to get into the terminals on the back of the card and do not
touch the terminals with your fingers.
Notice for when transferring to another party, or disposing of the memory card
“Format” or “delete” using the camera or a PC will only modify the file management
information, it will not erase the data in the memory card completely.
It is recommended to physically destroy the memory card or use the commercially
available computer data deletion software to completely erase the data in the
memory card before transferring to another party or disposing.
Management of data in the memory card is the responsibility of the user.
About 3D
Card
To Next Page
Loading...
Need help?
General
Weight and Dimensions
