139
4. Picture Quality and Colour Tone Settings
Bracket setting is performed based on the adjustment values for the White Balance fine
adjustment, and 3 pictures with different colours are automatically recorded when the
shutter button is pressed once.
1 Fine-adjust the White Balance in step 2 of “Finely
adjusting the White Balance” and then perform the
bracket setting by rotating the rear dial.
Rotating the rear dial to the right:
Horizontal ([A] to [B])
Rotating the rear dial to the left:
Vertical ([G] to [M])
•
You can also set the bracket by touching [ ]/[ ].
2 Press [MENU/SET].
•
[ ] is displayed in White Balance icon in the screen when the White Balance Bracket is set.
• The White Balance Bracket setting is released when this unit has been turned off (including
Sleep Mode).
• You will only hear the shutter sound once.
Not available in these cases:
•
The White Balance Bracket does not work in the following cases:
– Panorama Shot Mode
– [Glistening Water]/[Glittering Illuminations]/[Handheld Night Shot]/[Soft Image of a Flower]
(Scene Guide Mode)
– When recording motion pictures
– When [Quality] is set to [ ], [ ] or [ ]
– When [HDR] is set to [ON]
– When using [Multi Exp.]
– When using [Time Lapse Shot]
White Balance Bracket
GGGGGG
AAAAAABBBBBBB
MMMMMM
To Next Page
Loading...
Need help?
General
