191
6. Shutter and Drive Settings
• The picture will be saved in JPEG format.
• The picture will be saved with recording information (Exif information), including its shutter
speed, aperture and ISO sensitivity information.
1 Select a 4K burst file ( ) on the playback screen,
and press 3.
•
You can also perform the same operation by touching the
icon [ ].
• The slide view screen for selecting pictures will be
displayed. It takes a few seconds until the screen is
displayed.
2 Touch and drag the frames to select the frame you want to save as a picture.
•
You can also perform the same operation by pressing
2
/
1
.
<Slide view screen>
Selecting pictures from 4K burst file and saving
Setting [Playback Mode] in the [Playback] menu to [4K PHOTO] enables you to play
back only 4K burst files and pictures created from them.
4K burst files recorded with [ ] ([4K Burst]) ≠P191
4K burst files recorded with [ ] ([4K Burst(S/S)])
≠P191
4K burst files recorded with [ ] ([4K Pre-Burst]) ≠P194
4K burst files recorded with [ ] ([4K Burst]) or [ ] ([4K Burst(S/S)])
When you select pictures from a 4K burst file recorded with [ ] ([4K Burst(S/S)])
or any 4K burst file with long burst time, we recommend that you make a rough
selection of scenes using the 4K burst playback screen first, and then select the
desired frame using the slide view screen.
Position of the
displayed frame
To Next Page
Loading...
Need help?
General
