6. Shutter and Drive Settings
190
1 Select [ ] ([4K Pre-Burst]). (P185)
•
If you press the shutter button halfway, the aperture value
and shutter speed will be displayed.
2 Press the shutter button fully.
A Number of recordings that can be made
• Recording of a 4K burst file will be performed for
approximately 1 second before and after the moment that
the shutter button is pressed.
• The shutter sound will be heard only once.
• When [Auto Review] is enabled, the picture selection screen will be displayed
automatically. To continue recording, press the shutter button halfway to display the
recording screen.
• For information on how to select and save pictures from recorded 4K burst files, refer to P194.
• When the drive mode is set to 4K Photo and [4K PHOTO] is set to [ ] ([4K Pre-Burst]), the
camera temperature rises. In some cases, the camera may display [ ], switch to [ ] ([4K
Burst]), and disable the recording function to protect itself. Wait until the camera cools down.
• When recording with [ ] ([4K Pre-Burst]), images may not be displayed as smoothly as when
recording with the normal recording screen.
Recording with [4K Pre-Burst]
Recording tips
Focus and exposure
Auto Focus adjusts focus continuously, and except in Manual Exposure Mode, it
also adjusts exposure continuously.
•
Focus cannot be adjusted at the desired timing by pressing the shutter button
halfway or operating other controls.
• In situations where you want to lock focus and exposure, such as when the subject
is not at the centre, use [AF/AE LOCK]. (P171)
Battery drainage and camera temperature
When the drive mode is set to 4K Photo and [4K PHOTO] is set to [ ]
([4K Pre-Burst]), the battery drains faster and the camera temperature rises.
•
Select [ ] ([4K Pre-Burst]) only when recording.
25
p
1200
1200
AFS
4K
4:3
0
100010003.53.5
To Next Page
Loading...
Need help?
General
