5. Focus and Brightness (Exposure) Settings
160
Applicable modes:
By setting [Touch Pad AF] in [Touch Settings] (P60) in the
[Custom] menu, you can move the AF area displayed on the
viewfinder by touching the monitor.
•
If you touch the monitor when the Auto Focus Mode is set to
[Custom Multi] such as [ ], the AF area setting screen will be
displayed. (P155)
• Press the shutter button halfway to determine the focus position.
If you press [DISP.] before determining the focus position, the AF area frame returns to the
centre position.
• To cancel the AF area frame when the Auto Focus Mode (P151) is set to [š] ([Face/Eye
Detection]), [ ] ([Tracking]) or [ ] ([49-Area]), press [MENU/SET].
• The Touch Shutter function (P61) is disabled when using [Touch Pad AF].
Not available in these cases:
•
[Touch Pad AF] is not available when [Pull Focus] in [Snap Movie] is set to [ON].
Setting the AF area position with the Touch Pad
> [Custom] > [Touch Settings] > [Touch Pad AF]
[EXACT]
Moves the AF area of the
Viewfinder by touching a
desired position on the Touch
Pad.
[OFFSET]
Moves the AF area of the
viewfinder according to the
distance you drag the touch
pad (P59).
[OFF] —
To Next Page
Loading...
Need help?
General
