189
6. Shutter and Drive Settings
1 Select [ ] ([4K Burst(S/S)]). (P185)
2 Press the shutter button fully.
•
Recording of a 4K burst file will start.
• If you are using Auto Focus, [Continuous AF] will work
during recording. Focus will be adjusted continuously.
3 Press the shutter button fully again.
A Available recording time
• Recording of the 4K burst file will stop.
• When [Auto Review] is enabled, the picture selection
screen will be displayed automatically. To continue recording, press the shutter button
halfway to display the recording screen.
• For information on how to select and save pictures from recorded 4K burst files, refer to P191.
• When the ambient temperature is high or continuous [ ] ([4K Burst(S/S)]) recording is
performed, the camera may display [ ] and stop the recording to protect itself. Wait until the
camera cools down.
Recording with [4K Burst(S/S)]
Recording tips
Adding markers to select and save pictures
You can add markers if you press [Fn2] during recording. (Up to 40 markers for
each 4K burst file) When selecting and saving
pictures from a 4K burst file, you
can skip to the positions where you added markers.
25
p
AFS
4K
4:3
0
29
59
5
29m59s
To Next Page
Loading...
Need help?
General
