196
9. Stabiliser, Zoom and Flash
• When the Extra Tele Conversion is used, angle of view for still pictures will be different from the
angle of view for motion pictures because the zoom factor is different between them.
Angle of view for recording can be checked beforehand by matching the [Rec Area] (P209)
setting to the mode you wish to record in.
Not available in these cases:
•
This function is not available in the following cases:
– [Handheld Night Shot] (Scene Guide Mode)
– [Toy Effect]/[Toy Pop] (Creative Control Mode)
– When [Quality] is set to [ ], [ ] or [ ]
– When [Burst Rate] is set to [SH]
– When [HDR] is set to [ON]
– [Multi Exp.]
Simply zooming in with the Extra Tele Conversion
[MENU] > [Rec] > [Ex. Tele Conv.] > [TELE CONV.]
[MENU] > [Motion Picture] > [Ex. Tele Conv.] > [ON]
[OFF]
4:3 4:3
To Next Page
Loading...
