Application (Record)
Setting the burst function
- 119 - VQT4J31
Setting Speed No. of pictures Focus, exposure, White Balance
Approx. 2 pictures/sec.
100
*
1
Only the focus is fixed to the settings of the
first picture taken.
*
2
Approx. 2 pictures/sec.
100
*
1
Adjusted within the possible range.
Approx. 5 pictures/sec.
100
*
1
Only the focus is fixed to the settings of the
first picture taken.
*
2
Approx. 5 pictures/sec.
100
*
1
Adjusted within the possible range.
Approx. 11 pictures/sec. 12 Fixed to the settings of the first picture taken.
Approx. 40 pictures/sec. 40 Fixed to the settings of the first picture taken.
Approx. 60 pictures/sec. 60 Fixed to the settings of the first picture taken.
*
3
Complies with recording
conditions
(Flash burst)
5 Fixed to the settings of the first picture taken.
*
1
The number of burst pictures is limited by the picture-taking conditions and the type and/or status of
the card used.
*
2
The exposure and White Balance are adjusted within the possible range.
*
3
Carry out burst recording using the flash. Only in the , , mode
■
Note on the picture size setting
When [ ], [ ] or [ ] is set, the picture size will be smaller.
Aspect ratio
4:3 5 M, 3 M, 2 M, 0.3 M 2.5 M, 0.3 M 3 M
3:2 4.5 M, 2.5 M, 0.3 M 3 M, 0.3 M 2.5 M
16:9 3.5 M, 2 M, 0.2 M 3.5 M, 0.2 M 2 M
1:1 3.5 M, 2.5 M, 0.2 M 2 M, 0.2 M 2.5 M
■
To cancel
Select [ ] ([Single]) in step .
To Next Page
Loading...
