Preparations
Using the [Setup] menu
- 29 - VQT4J31
●
The travel date is calculated from the set departure date and the date set in the
camera’s clock. When destination is set in [World Time], days elapsed are calculated
based on local destination time.
●
When [Travel Setup] is set to [OFF], the number of days elapsed is not recorded. It is
not displayed even if [Travel Setup] is set to [SET] after recording.
●
If settings are made before departure date, number of days to departure are not
recorded.
●
To print [Location] or the number of days that have passed, either use [Text Stamp] or
print using the “PHOTOfunSTUDIO” software on the supplied CD-ROM.
●
[Travel Date] cannot be recorded for AVCHD motion pictures.
●
[Destination] cannot be recorded for MP4 motion pictures.
• For the setting procedures of the menu. (→25)
[Beep]
Change or mute the beep/shutter sounds.
■
Settings
[Beep Level]
/ / : High / Low / Mute
[Beep Tone]
/ / : Change beep tone.
[Shutter Vol.]
/ / : High / Low / Mute
[Shutter Tone]
/ / : Change shutter tone.
To Next Page
Loading...
