Preparations
Using the [Setup] menu
- 35 - VQT4J31
• For the setting procedures of the menu. (→25)
[Expo.Meter]
You can set whether to display the exposure meter when operations such as shutter
speed and aperture value adjustments or Exposure Compensation are performed.
■
Settings: [ON] / [OFF]
●
If the exposure meter is not displayed, press the [DISP.] button to switch the display of
the LCD monitor.
●
The exposure meter will turn off if no operation is performed for approximately 4
seconds.
[Lens Resume]
Save the zoom position and the Manual Focus position in the memory when the camera
is turned off.
■
Settings
[Zoom Resume]
[ON]: Returns to the zoom position that was saved in the memory when the camera
is turned on next time.
[OFF]
[MF Resume]
[ON]: Saves the Manual Focus position in the memory when the camera is turned
[OFF] or when the focus selector switch is set to modes other than [
]. This
setting will return to the focus position saved in the memory when the camera
is turned on or the focus selector switch is set to [ ] next time.
[OFF]
[MF Assist]
Set whether to enlarge the focus point when Manual Focus is used to adjust focus.
• About MF assist (→105)
■
Settings: [ON] / [OFF]
To Next Page
Loading...
