Application (Record)
Using the [Rec] menu
- 134 - VQT4J31
You can perform settings such as Picture size and flash.
• For the setting procedures of the menu. (→25)
[Photo Style]
You can adjust the colours and picture quality according to the concept of the
picture that you want to create.
■
Settings
[Standard] Standard setting.
[Vivid] Setting with slightly high contrast and saturation.
[Natural] Setting with slightly low contrast.
[Monochrome]
Setting that creates a picture using monochrome shades of
grey only, such as black and white.
[Scenery]
Setting that creates a picture using vivid colours for the blue
sky and green.
[Portrait] Setting that produces the look of a healthy complexion.
[Custom]
Setting for using colours and picture quality that were
registered in advance.
■
Adjusting the picture quality and registering a custom setting
Press to select the photo style to be adjusted, and press
Press to select an item and press to adjust.
Press [MENU/SET]
Settings Settings and results – +
[Contrast]
Difference between light
and dark in a picture
Low High
[Sharpness] Picture contour Soft Sharp
[Saturation]
*
Colour change Quiet impression Vivid impression
[Noise Reduction] Noise reduction Priority on resolution
Priority on noise
reduction
[Custom setting]
You can register the setting for the adjusted picture quality to [Custom].
Select [Custom setting] and press [MENU/SET]
Select [Yes] and press [MENU/SET]
*
When [Monochrome] is selected, the colour tone is changed.
●
The settings of the adjusted picture quality will be stored in memory even when the
camera is turned off.
●
When the picture quality is adjusted, [+] will be displayed in the icon.
To Next Page
Loading...
