Panasonic LUMIX DMC-LZ8

Connecting to other equipment
• Do not use any other AV cables except
the supplied one.
• The top and bottom or left and right of
the picture may be cut off slightly when
it is displayed due to the characteristics
of the TV.
• Read the TV operating instructions too.
• Pictures might be slightly blurred if you
show them vertically on a television.
• Set the volume of this unit to 0 when
outputting audio.(P21)
• You can view pictures on TVs in other
countries (regions) which use the NTSC
or PAL system when you set [VIDEO
OUT] in the [SETUP] menu. Even if you
set [VIDEO OUT] to [PAL], the output
signal will still be NTSC in the recording
mode.
• Playback pictures on TV with SO
Memory Card slot
You can put your SO Memory Card in a
television with an SO Memory Card slot to
show still images.
m- .. ~ ... ~ - _. _. ~. -' .. '- -- .. - -. -'
• Depending on the television, some
pictures may not take up the whole
screen.
• You cannot play motion pictures. To
play back motion pictures, connect the
camera to the TV with the AV cable
(supplied).
• You can use SOHC Memory Card only
on SOHC Memory Card compatible TV.
• You may be unable to play MultiMedia
Cards.
Playing Back Pictures with a TV Screen
(t<~~t !I i !1!~lIl1liln Ullllililllllll PlI§! D;;U.IllIlUIIUlili I i IMIUi I r fl'"
m
· .
. I .'-
..
• Playing back pictures using the AV
cable (supplied)
• Set the [TV ASPECT]. (P23)
• Turn the camera and the TV off.
1 Connect the AV cable ®
(supplied) to the [AV OUT] socket
of the camera.
• Connect the AV cable with the [ .-]
mark facing the ~] mark on the [AV
OUT] socket.
• Hold ® and then insert or pull the AV
cable straight.
2 Connect the AV cable to the
video input and the audio input
sockets on the TV.
o Yellow: to the video input socket
8 White: to the audio input socket
3 Turn the TV on and select
external input.
4 Turn the camera on and playback
the picture.
107