Basic
Taking Pictures
in
the Desired Setting
(P
Program AE Mode)
'IllIfI) I
II:
WIISI!II!!i!l
I.l!Ulliilllll!8
§!
fiT
lililU!illli
r
lpr~.\I!ln
HUMl§;
II I!
mIl
iLUL
I
IiI!rL:li~.~~~~~~iQliEIi!Ii
This mode allows you to take pictures
freely as more options are setup is
available than Intelligent auto mode
[1fl1].
• The camera beeps twice when the
subject is focused.
• The camera can focus between 50 cm
(1.64 feet) (Wide)/1 m (3.28 feet) (Tele)
and
00.
(When the macro
is
not used)
• The following indicates that the subject
is
out of focus.
- Focus indication blinks (green).
-
AF
area turns white to
red
or no
AF
area.
-Beeps
4 times.
• The focus indicator may light even if the
subject is not properly focused if the
subject is out of range.
4 Press the halfway pressed shutter
button fully to take a picture.
• Using the flash
If the flash
is
set to AUTO
[~A]'
AUTO/
RED-EYE
[~A@]
or Slow sync.lRed-eye
reduction
[~S@],
the flash will work when
you press the shutter button if the camera
determines that the area to be shot is too
dark.
• You can change the flash settings (P43).
~
~
• When you press the shutter button, the
screen may become bright
or
dark for
a moment. This function allows easy
adjustment of focus and the recorded
picture will not be affected.
• Be careful not to move the camera when
you press the shutter button.
• Do not cover the photo flash or the AF
assist lamp with your finger or other
objects.
• Do not touch the lens.
2 Hold the camera gently with both
hands, keep your arms still at
your side and stand with your
feet and shoulder-width apart.
®
L
@ Flash
® AF assist lamp
3 Aim the AF area ® to the point you
want to focus on, and press the
shutter button halfway to focus.
® ©
®
CD
© The focus indication lights green.
® AF area: white - green
CD
Aperture value
® Shutter speed
30
VQT1L86
To Next Page
Loading...
Need help?
General
