Advanced-Shooting
Taking Pictures with the Self-timer
_ I I
UilSf
!iIllIIIlWUlflrmUm
!IlI.mlll
1
IIIwmm
!JIIIIlI')i_
JIB
PAS
M.:'
~
r.gSCN
I
1 Press
.....
[<9].
2 Select shutter speed using
AlT
or
.....
[<9].
3 Press [MENU/SET].
• You can also press the shutter
button
halfway
to
set.
• When 5 seconds pass without any
operation, the setting selected at the time
is automatically adopted.
4 Press the shutter button halfway
to
focus and then press
it
fully
to
take a picture.
~
~
• When using a tripod or
in
other cases,
setting the self-timer to 2 seconds
is
a convenient way to stabilize the jitter
caused by pressing the shutter button.
• When you press the shutter button
fUlly
with one stroke, the subject
is
automatically focused just before the
recording.
In
dark places, the self-timer
indicator blinks and then it may turn
on
brightly to work as the AF assist lamp for
focusing
on
the subject.
•
In
Intelligent auto mode
[1f!1],
[10 SEC.]
or [OFF] is selectable.
•
In
[SELF PORTRAIT] mode,
[2
SEC.] or
[OFF]
is
selectable.
• When you set the self-timer
in
burst
mode, the camera starts taking a picture
2 or 10 seconds after the shutter button
is
pressed. The number of pictures taken
at one time
is
fixed to
3.
•
We
recommend using a tripod when
setting the self-timer.
• You cannot use the self-timer
in
[HI-
SPEED BURST].
• The self-timer indicator
® blinks and the
shutter
is
activated
after 10 seconds (or 2
seconds).
• If you press [MENU/
SET] when the self-
timer
is
being set, the
self-timer setting is canceled.
®
~l
47
To Next Page
Loading...
Need help?
General
