Preparation
MENU
•
Press
[~]
to display menu, enter the setup menu
[~]
and select the item. (P20)
The settmg marked
"~"
means it is the initial setting.
t=I
HISTOGRAM (P41)
Set whether histogram
is
displayed or not
with the recording information.
~OFF";;
";"·'.i,··.
',.
,.ON
;.'
[iJ]
TRAVEL DATE (P63)
Set the departure and return dates.
"OFF~::
"
SeT
~
Restrict battery consumption
....
ECONOMY
QZZ
POWER SAVE
If you perform no operations, the camera
turns off automatically after the interval
you set.
OFF
2MJN.
,',
~5
MIN~
10 MIN.
• Press the shutter button halfway or
restart the camera to cancel.
• Power save
is
fixed to
[5
MIN.]
in
Intelligent auto mode
[Ifll].
• This function is not activated
in
the
following cases.
- When connected to the
PC
/ printer
- While recording / playing back motion
pictures
- While performing slide show
~
AUTO LCD OFF
LCD monitor is turned off automatically
while the camera
is
not
in
use for the set
time (in recording mode only).
~OFF
15
SEC~
30$&0.
22
VQT1 LB6
• The status indicator lights while the LCD
monitor is turned off. Press any button to
turn
on
the LCD monitor again.
• If you fix the Auto LCD off function to [15
SEC.]/[30 SEC.], the power save
is
fixed
to
[2
MIN.]
• This function is not activated in the
following cases.
- While a menu screen is displayed
- While the self-timer is set
- While recording motion pictures
~
Show images you have taken.
E2I
AUTO REVIEW
Adjust how long the recorded picture
automatically appears
on
the screen.
,Off
l-SeO•
•
2S&O:
"","."'
,H'OL.[)
ZO:OM
g,
• When [HOLD] is selected, the picture
remains
on
the display. Press [MENU/
SET] to cancel.
• When [ZOOM] is set, the picture
is
displayed for 1 second, then at 4 x zoom
for further 1 second.
• AUTO REVIEW works even if set to
[OFF]
in
[AUTO BRACKET], [BURST] or
[HI-SPEED BURST] modes. However,
[HOLD] and [ZOOM] are disabled.
• You cannot change settings
in
[AUTO BRACKET], [BURST], [SELF
PORTRAIT], [HI-SPEED BURST] and
motion picture
OEI]
modes.
• Fixed to [2 SEC.]
in
Intelligent auto mode
[Ifll]·
To Next Page
Loading...
Need help?
General
