Others
Message Display
Confirmation messages or error messages will
be
displayed
on
the screen
in
some cases.
The major messages are described below as examples.
[CURRENT BATTERY TYPE SETTING: [CANNOT
BE
SET ON THIS PICTURE]I
ALKALINElNi-MH]![CURRENT BATTERY [CANNOT
BE
SET ON SOME PICTURES]
TYPE SETTING: OXYRIDE] [DPOF], [TITLE EDIT], and [TEXT STAMP]
This message
is
displayed the first time cannot
be
set for pictures not based
on
the
you insert batteries and when the batteries DCF standard.
are exhausted and you replace them.
If
the [NOT ENOUGH SPACE ON BUILT-IN
battery type being used is different from MEMORY]/[NOT ENOUGH MEMORY
ON
the one indicated
in
the message, change THE CARD]
the battery type
in
[SATTERY TYPE]
in
the There is no space left on the built-in
[SETUP] menu (P21). memory or the card.
[THIS MEMORY CARD IS LOCKED] • When you copy pictures from the built-
• Cancel the card lock. (P17)
in
memory to the card (batch copy), the
[NO VALID PICTURE TO PLAY] pictures are copied until the capacity of
Play back after recording or after inserting the card becomes full.
a card with a recorded picture. [SOME PICTURES CANNOT
BE
[THIS PICTURE IS PROTECTED] COPIED]/[COPY COULD NOT
BE
After canceling the protect setting (P98), COMPLETED]
you can delete the picture. The following pictures cannot
be
copied.
• When a picture with the same name
as
[THIS PICTURE CANNOT BE DELETED]! the picture to be copied exists
in
the copy
[SOME PICTURES CANNOT
BE
destination. (When copying pictures from
DELETED] the card to the built-in memory)
The pictures not based
on
the DCF • Files not based
on
the DCF standard.
standard cannot be deleted.
Moreover, pictures recorded or edited by
To delete this kind of picture, first save
other equipment may not be copied.
your data to your computer, then use this
unit to reformat the card. (P24) [BUILT-IN MEMORY ERROR FORMAT
BUILT-IN MEMORY?]
[NO ADDITIONAL DELETE SELECTIONS This message will be displayed when
you
CAN
BE
MADE] format the built-in memory
on
the
PC
or
You have selected more than the allowed
remove the battery without turning the
number of items
in
multi delete or the
camera off. Format the built-in memory of
MULTI setting
in
[TITLE EDIT] or [TEXT the camera again. (P24) The data
on
the
STAMP]. Repeat the procedure
as
built-in memory will be deleted.
necessary.
You have placed more than 999 pictures
in
your favorites list.
112
VQT1L86
To Next Page
Loading...
