Others
• Connecting to a TV, computer or printer
Conditions
Causes
The picture does not
Is
the camera connected to the TV correctly?
appear on the television.
Set the TV to video input mode.
The TV screen is
disturbed or displayed
in
monochrome.
The display areas
on
Depending on the TV model, the area display may
be
smaller
the
TV
screen and the so the picture may be stretched horizontally or vertically and
camera's LCD monitor
the top and bottom or left and right of the picture may be cut
are different.
off when
it
is
displayed. This is due to the TV specifications
and
is
not a malfunction.
Cannot play motion
You cannot play motion pictures if you have inserted the card
pictures
on
a television.
into a card slot
on
a television.
Connect the camera to the television with the included AV
cable and play the pictures on this unit.
(P107)
The picture size does Check the [TV ASPECT] setting
on
this unit. (P23)
not fit the TV screen.
Cannot upload pictures Check the connections.
to your computer.
Check that the computer has correctly recognized the
camera.
The computer does not
Disconnect the USB connection cable, then insert the card
recognize the card. and reconnect the cable.
(The built-in memory is
recognized.)
The pictures cannot be Does the printer support PictBridge? You cannot print
printed with printers. pictures with printers which do not support PictBridge. (P103)
The sides of printed
• If your printer has trimming and border settings, change the
images are cut off.
settings
so
that there is no trimming and no border. (Read
your printer's operating instructions.)
• Some photography shops can handle pictures shot
in
the [IGID] aspect ratio. Enquire before sending them for
printing.
• Others
Conditions Causes
Unreadable language
Press [MENU/SET], select the [SETUP] menu icon
[~]
and
was selected by
then select the
[Gill]
icon to set the desired language. (P24)
mistake.
Cannot change the auto
Is
auto bracket, [SELF PORTRAIT], [HI-SPEED BURST],
review setting.
burst or motion picture mode
nEil
activated? You cannot
change the auto review setting when using these modes.
118
VOT1L86
To Next Page
Loading...
