Panasonic LUMIX DMC-LZ8

Multiple
This is the method in which the
camera measures the most
suitable exposure by judging
the allocation of brightness
on
the whole screen automatically.
(Usually, we recommend using
this method.)
Center weighted
This is the method used to focus
on the subject on the center of the
screen and measure the whole
screen evenly.
Spot
This is the method to measure
the subject in the spot metering
target
®.
[]
[METERING MODEj
I!iiI Setting the method to measure .
brightness
You can switch to the following metering
modes.
IPASMBI
m." ~. N-' ·N' W, '.. 'W,~ _.. •• '" .~. .,,, ,~ 'N' .'....
• Metering mode is fixed to multiple [[Ell]
in Intelligent auto mode [1flJ].
• When multiple [[Ell] is selected and the
AF mode
is set to face detection [~],
the camera will adjust the exposure to
suit the person's face.
, . - ..... -." .
, .:' "<":? ;"'~' ,' .. ",.; .1.,'" '. '
RED 0 BLUE
.............. 11 ••••••••
lim we ADJUST.
Advanced-Shooting
Press C@] to display the [REC] mode menu and select the item to set. (P19)
• To finely adjust the white balance
If you set other than [AWB], you can
finely adjust the white balance while the
recording screen
is displayed.
The white balance can be adjusted
for each setting independently and is
memorized even if the camera
is turned
off.
o Press. several times until [WB
ADJUST.]
is displayed.
• Adjust
with~.
.... : red (blue, bluish)
~: blue (magenta, reddish)
(no adjustment:
0)
.. Press [MENU/SET] to finish.
When you finely adjust the white
balance, the white balance icon changes
to
red or blue.
m «. .- ~, _. '." .~ - - •• ~. ON ,- .- NO .- - ".
• White balance fine adjustment is effective
when using flash.
• The white balance fine adjustment level
in
[b.-A] returns to [0] when you reset
[~SET] (white set).
• You cannot use white balance fine
adjustment when [COLOR EFFECT]
is set to [W/B], [SEPIA], [COOL] or
[WARM].
72
VQT1L86 __ •• _. ._nr . • ........ __
A_~ ,-com7 ... 'tM'i1" "MI.". '.11,.' au ' __ 'll! ~