- 122 -
Playback/Editing
∫ To print the date
After setting the number of prints, set/cancel printing with the recording date by pressing
[DISP.].
•
Depending on the photo printing store or the printer, the date may not be printed even if you set to
print the date. For further information, ask at your photo printing store or refer to the operating
instructions for the printer.
• The date cannot be printed on pictures with date or text stamped.
• You can set the number of prints up to 999.
• Depending on the printer, the date print settings of the printer may take precedence so check if this
is the case.
• It may not be possible to use the print settings with other equipment. In this case, cancel all the
settings, and reset the settings.
• This function is not available in the following cases:
– Motion pictures
– File that does not comply with the DCF standard
To Next Page
Loading...
Need help?
General
