- 153 -
Wi-Fi
[Wi-Fi Setup] Menu
For details on how to select the [Wi-Fi] menu settings, refer to P41.
Configure the settings required for the Wi-Fi function.
[Wi-Fi Setup] cannot be changed when connected to Wi-Fi.
1 Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET].
2 Press 3/4 to select item, and press [MENU/SET].
•
Refer to P142 for details.
• For details on how to enter characters, refer to “Entering Text” section on P90.
• If you are using the PC with standard settings, you do not need to change the workgroup.
[Smart Transfer] —
[PC Connection]
You can set the workgroup.
To send images to a PC, a connection to the same workgroup as the
destination PC is required.
(The default setting is “WORKGROUP”.)
[Change Workgroup Name]:
Enter the workgroup of the connecting PC.
[Restore to Default]:
Restores the default state.
[Device Name]
You can change the name of this unit.
1 Press [DISP.].
2 Enter the desired device name.
•
For details on how to enter characters, refer to “Entering Text”
section on P90.
• A maximum of 32 characters can be entered.
To Next Page
Loading...
Need help?
General
