- 99 -
Recording
∫ Setting up [ ] ([AF Tracking])
Align the subject with the AF tracking frame, and then press
4 to lock onto the subject.
A AF tracking frame
• AF area will be displayed in yellow when a subject is recognized, and
focus will automatically adjust continuously following the subject’s
movement (Dynamic tracking).
• AF tracking is canceled when 4 is pressed again.
• Dynamic tracking function may not work in the following cases:
– When the subject is too small
– When the recording location is too dark or bright
– When the subject is moving too fast
– When the background has the same or similar color to the subject
– When jitter is occurring
– When using the zoom
• When the lock fails, the AF tracking frame will turn red and then disappear.
Press 4 again.
• The camera records pictures with [AF Mode] as [Ø] when locked or Dynamic Tracking is not
working.
• AF tracking will be canceled after you take a picture. Set AF tracking for each picture you take.
Applicable modes:
Type of optical measurement to measure brightness can be changed.
[Metering Mode]
Settings Description of settings
[C] ([Multi Metering])
This is the method in which the camera measures the most suitable
exposure by judging the allocation of brightness on the whole screen
automatically.
Usually, we recommend using this method.
[]([Center Weighted])
This is the method used to focus on the subject on the center of the
screen and measure the whole screen evenly.
[Ù] ([Spot])
This is the method to measure the subject in the
spot metering target A.
To Next Page
Loading...
Need help?
General
