- 88 -
Recording
Taking Pictures in Custom Mode
Recording Mode:
You can register the current camera settings as custom settings.
If you then record in Custom Mode, you can use the registered settings.
•
Initial setting of the Program AE Mode is registered as the custom settings initially.
If you want to take pictures that have the same settings, you can register up to four items of the
current camera settings to [Cust.Set Mem.].
1
Set the mode dial to select the mode you wish to save, and then set the
menu on the camera.
2
Select [Cust.Set Mem.] on the [Setup] menu. (P41)
3
Press 3/4 to select the custom set to register and then press [MENU/
SET].
• Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
Registering Personal Menu Settings (Registering custom settings)
Custom set Description of settings
The settings are registered for [ ] on the mode dial.
• You can record using by simply rotating the mode dial to the
corresponding position. If you register the custom settings you
use often, it is then convenient to use them.
The settings are registered for [ ] on the mode dial.
• You can register up to 3 sets of custom settings and use the
different sets as condition demand.
To Next Page
Loading...
Need help?
General
