- 135 -
Wi-Fi
You can acquire location information from a smartphone, and write it on images afterwards.
•
You can write location information sent from a smartphone on images by using [Location Logging] in
the [Playback] menu of the camera. (P114)
1 Synchronize the times
2 Start recording location information
3 Start recording images
4 Finish recording the location information
5 Send the location information
6 Write the location information using [Location Logging] in the [Playback] menu
∫ Operate the smartphone
1 Connect to a smartphone. (P129)
2 Select [ ].
3 Select [Geotagging].
4 Select an icon.
•
Cautions for Use:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject when
you use this function. Use at your own risk.
• If you have changed the clock setting of this unit or the smartphone after [Time sync], perform
[Time sync] again.
• On the smartphone, you can set the acquisition interval of location information and check the
transfer status of location information.
Refer to [Help] in the “Image App” menu for details.
Sending location information to the camera from a smartphone/tablet
Starts/stops recording location information.
• Before you start recording location information, perform [Time sync].
• The smartphone battery drains faster while location information is being recorded.
When recording of location information is not necessary, stop it.
Sends location information.
• Follow the on-screen messages to operate the smartphone.
To Next Page
Loading...
Need help?
General
