- 158 -
Connecting to other equipment
1
Connect the computer and camera with the USB connection cable
(supplied).
• Please turn this unit on and your PC before connecting.
• Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may bend out of shape, which may cause malfunction.)
• Do not use any other USB connection cables except the supplied one or a genuine
Panasonic USB connection cable (DMW-USBC1: optional).
2
Press 4 to select [PC], and then press [MENU/SET].
3
Drag and drop files and folders in the camera to the PC.
• When the image transfer is complete, disconnect the USB connection cable safely.
• If the remaining battery power becomes low while the camera and the PC are communicating, the
alarm beeps.
Disconnect the USB connection cable safely. Otherwise, data may be destroyed.
• Before inserting or removing a card, turn the camera off and disconnect the USB connection cable.
Otherwise, data may be destroyed.
Transferring images to a PC
A USB connection cable (supplied)
B Insert the USB connection cable so that its [ ] mark will face the [ ] mark side of the
camera.
• For Windows: A drive ([LUMIX]) is displayed in [Computer]
• For Mac: A drive ([LUMIX]) is displayed on the desktop
To Next Page
Loading...
Need help?
General
