- 87 -
Recording
This effect transforms pin-points of light into a star effect.
This effect leaves one selected color to emphasize impressiveness.
[Star Filter]
[One Point Color]
∫ Set the color to leave in
1 Fit the color you want to leave in
the frame at the center of the
screen, and then press [MENU/
SET].
•
You can set the color again by
pressing [DISP.].
2 Check the color you have set, and
then press [MENU/SET].
•
The set color is memorized even if
the camera is turned off.
• Depending on the subject, the set color may not be left in.
To Next Page
Loading...
Need help?
General
