- 72 -
Recording
Determine the exposure by manually setting the aperture value and the shutter speed.
1
Set the mode dial to [ ].
2
Press [EXPOSURE].
3
Press 3/4/2/1 to set the aperture and shutter
speed.
4
Press [EXPOSURE].
∫ Optimizing the ISO sensitivity for the shutter speed and aperture value
When the ISO sensitivity is set to [AUTO], the camera sets the ISO sensitivity automatically so
that the exposure will be appropriate for the shutter speed and aperture value.
•
Depending on recording conditions, an appropriate exposure may not be set or the ISO sensitivity
may become higher.
∫ Manual Exposure Assistance
If you press the shutter button halfway, the Manual Exposure Assistance is displayed.
•
The Manual Exposure Assistance is an approximation. We recommend checking the pictures on the
playback screen.
• The brightness of the monitor and the recorded pictures may differ. Check the pictures on the
playback screen.
• The aperture value and the shutter speed displayed on the screen turn red when the exposure is not
adequate.
• The minimum shutter speed you can set differs according to the ISO sensitivity setting.
• We recommend using a tripod when the shutter speed is slow.
• In motion picture recording, the aperture and shutter speed are set automatically.
Manual Exposure Mode
2/1: Aperture Value A
3/4: Shutter Speed B
The exposure is adequate.
Set to faster shutter speed or larger aperture value.
Set to slower shutter speed or smaller aperture value.
1/30
1/30F 3.3
F 3.3
To Next Page
Loading...
