- 137 -
Wi-Fi
1 Press [Wi-Fi].
2 Press 3/4/2/1 to select [New Connection], and then press [MENU/SET].
3 Press 3/4 to select [Send Images While Recording],
and then press [MENU/SET].
4 Press 3/4 to select [Smartphone], and then press
[MENU/SET].
5 Press [MENU/SET].
6 Press [MENU/SET].
•
For details on the connection methods, refer to P130, 131.
7 Press 3/4 to select a device you want to connect, and then press [MENU/SET].
8 Check the send setting, and then press [MENU/SET].
•
To change the send setting, press [DISP.]. (P152)
9 Take pictures.
•
The pictures are sent automatically after taking them.
• To change the setting or disconnect, press [Wi-Fi]. (P126)
You cannot change the settings while sending pictures. Wait until sending is complete.
• You cannot record motion pictures when the camera is connected using [Send Images While
Recording].
Sending an image each time a recording is made ([Send Images While Recording])
Cancel
Select
Set
Send Images Stored in the Camera
Send Images While Recording
Remote Shooting & View
Select a function
To Next Page
Loading...
