- 47 -
Basic
• Motion picture recording area display is only an approximation.
• Recording area display may disappear when zooming to Tele depending on the picture size setting.
• The setting is fixed to [OFF] in the following case.
– Intelligent Auto Mode
• The setting is fixed to [OFF] in the following case.
– Intelligent Auto Mode
• [Auto Power Off] is fixed to [5MIN.] in the following case.
– Intelligent Auto Mode
• [Auto Power Off] does not work in the following cases.
– When connecting to a PC or a printer
– When recording or playing back motion pictures
– During a Slide Show
– During panorama playback (while pausing)
– When using a Wi-Fi connection
[Video Rec Area]
Angle of view for motion picture recording can be checked.
[ON]/[OFF]
[Zoom Resume]
This allows you to save the zoom position when you turn off the
camera.
[ON]/[OFF]
q [Economy]
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
Also, the battery life is conserved by dimming the monitor.
p [Auto Power Off]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[2MIN.]/[5MIN.]/[10MIN.]/[OFF]
[Monitor Power Save]:
The brightness of the monitor is lowered.
[ON]/[OFF]
ECO
To Next Page
Loading...
Need help?
General
