VQT2R48 83
The registration screen is displayed for the third time (estimate). (This does not occur
in [SELF PORTRAIT] Scene Mode, [BURST], [AUDIO REC.], [AUTO BRACKET] or
[MULTI ASPECT].)
If the registration screen is not displayed easily, recording in the same environment and
with the same expression will make it display more easily.
If a face is not recognised despite being registered, re-registering the person from
[REC] menu’s [FACE RECOG.] at that location will make it easier for the camera to
recognise the person.
If the registration screen is displayed for a person already registered, making additional
registration of the person in that status will make it easier for the camera to recognise
the person.
If a picture recorded with a flash is registered, it may be difficult for the camera to
recognise the person.
When [AUTO REGISTRATION] is set to [ON], the [FACE RECOG.] setting is also
switched to [ON ] automatically.
Setting recognition sensitivity
The Sensitivity setting of the camera can be set if it is having difficulty with Face
Recognition or making mistakes.
Select [FACE RECOG.] from
[REC] menu (20)
Select [SET]
Select [SENSITIVITY]
Select the level of a
sensitivity setting
[HIGH]: Set when camera
is having difficulty
recognizing faces
[NORMAL]: The usual setting
[LOW]: Set when the camera
frequently recognises
a face as that of a
different person
Press the shutter button
halfway to close the menu
Setting [SENSITIVITY] at [HIGH] makes it easier for the camera to recognise faces but
also increases the possibility of recognizing the face as that of a different person.
To Next Page
Loading...
