38 VQT2R48
Taking pictures with your own settings
[PROGRAM AE] Mode (Continued)
Recording Mode:
Align focus for desired composition
Useful when subject is not in centre of picture.
First adjust focus according to subject
Hold down halfway
Align the AF area
with the subject
AF area
Subjects/environments which may
make focusing difficult:
• Fast-moving or extremely bright
objects, or objects with no colour
contrast.
• Taking pictures through glass or near
objects emitting light. In dark, or with
significant jitter.
• When too close to object or when
taking pictures of both distant and
close objects together in the same
picture.
We recommend using the ‘Face
Detection’ function when taking
pictures of people (99).
Return to desired composition
Press fully
AF area
Orientation detection function
Still pictures taken with the camera held vertically are automatically played back vertically.
(Only when [ROTATE DISP.] is set to [ON])
Still pictures taken with the lens surface facing directly up or down and still pictures
taken on other cameras may not be rotated. Additionally, still pictures taken while
holding the camera upside down are not rotated automatically.
Motion pictures are not displayed vertically.
The focus display flashes and beep sounds when focus is not
aligned.
Use the focus range displayed in red as a reference.
Even if the focus display is lit, the camera may be unable to
bring the subject into focus if it is out of range.
AF area is displayed larger in dark conditions or when using
Digital Zoom.
Most displays are temporarily cleared from screen when the
shutter button is pressed halfway.
Focus display
Focus range
To Next Page
Loading...
Need help?
General
