VQT2R48 89
Using GPS to set the Clock
Using the date and time information in the GPS signal, the camera can automatically
update its [CLOCK SET]. Also, after moving from your home area to one in a different
time zone, the time is changed to the local time automatically when positioning is
successful. Perform [CLOCK SET] in advance.
Select [AUTO CLOCK SET] (20) from the [TRAVEL MODE]
menu
Select [ON]
Perform the operations from step in “Setting the Clock”
(first time only) (17)
During positioning, if there is a difference of 1 minute or more between the GPS time
information and the [CLOCK SET] time, the time is corrected automatically.
When [AUTO CLOCK SET] is turned to [ON], [WORLD TIME] is set to [AUTO].
When [WORLD TIME] is set to something other than [AUTO], [AUTO CLOCK SET] is
turned to [OFF].
Time and date corrected by [AUTO CLOCK SET] is not as accurate as radio clocks. If
the time and date are not properly corrected, reset with [CLOCK SET].
Return to the menu screen
In the following cases, “- - -” is displayed.
• There is no location name information to display
• There are no nearby landmarks (It may be possible to select landmarks in [GPS
AREA SELECT].)
When the text of the location name information is long, such as when multiple items are
set for display, a scroll display is used.
To Next Page
Loading...
