VQT2R48 57
When recording, you can control the shutter speed to meet your recording purposes.
Aperture is automatically adjusted to be appropriate for the set shutter speed.
Set to (recording)
Set to ([SHUTTER-PRIORITY] Mode)
Determine shutter speed
• At faster shutter speeds,
movements by the subject show
as if they are still.
• At slower shutter speeds,
subjects that are moving show
as jittery.
• When the picture is too bright
or too dark or there is incorrect
exposure, the numbers for the
aperture value and shutter speed
are shown in red.
Shutter speed
Shutter speeds that can be set
Shutter speed (seconds) Aperture values set on this camera
86543.2
F3.3 - F6.3
2.5 2 1.6 1.3 1
1/1.3 1/1.6 1/2 1/2.5 1/3.2
1/4 1/5 1/6 1/8 1/10
1/13 1/15 1/20 1/25 1/30
1/40 1/50 1/60 1/80 1/100
1/125 1/160 1/200 1/250 1/320
1/400 1/500 1/640 1/800 1/1000
1/1300
1/1600 F3.5 - F6.3
1/2000 F4.0 - F6.3
• Aperture values that are set vary depending on the zoom position. (The above table is
at max. W.)
LCD monitor brightness may vary from the actual still picture recorded.
When using a slow shutter speed, it is recommended to use a tripod.
In [SHUTTER-PRIORITY] Mode, cannot be set.
Determine shutter speed and record
[SHUTTER-PRIORITY] Mode
Recording Mode:
To Next Page
Loading...
Need help?
General
