40 VQT2R48
Taking pictures with zoom (Continued)
Recording Mode:
The enlargement ratio displayed in the bar on screen is an estimate.
In certain Recording Modes, ‘Tele macro’ function (49) is activated when maximum
zoom ratio is reached.
A greater degree of distortion may be generated by taking wider-angled pictures
of close objects, while using more telescopic zoom may result in more colouring
appearing around the outlines of objects.
The camera may make a rattling noise and vibrate when the zoom lever is operated -
this is not a fault.
Extra Optical Zoom cannot be used in the following cases:
[MACRO ZOOM], motion picture, [TRANSFORM], [HIGH SENS.], [HI-SPEED BURST],
[FLASH BURST], [PIN HOLE], and [PHOTO FRAME] Scene Modes
Digital Zoom cannot be used in the following modes:
([INTELLIGENT AUTO] Mode), ([CLIPBOARD] Mode), Scene Modes
([TRANSFORM], [HIGH SENS.], [HI-SPEED BURST], [FLASH BURST], [PIN HOLE],
[FILM GRAIN] and [PHOTO FRAME])
[ZOOM RESUME] (25) allows zoom ratio to be memorised even if power is turned off.
Maximum zoom ratios by picture size
Optical Zoom Extra Optical Zoom
[PICTURE
SIZE]
12 M
8 M
5 M 3 M 0.3 M
11.5 M
7.5 M
4.5 M 2.5 M 0.3 M
10.5 M
7 M
4.5 M 2 M 0.2 M
Max. enlargement 12 x 14.7 x
18.8 x
23.4 x
When the picture aspect ratio is
What is Extra Optical Zoom (EZ)?
If, for example, set to ‘3M
(equivalent to 3 million pixels), a picture will only be taken
of a 3M-sized central part of a 12 M (equivalent to 12.1 million pixels) area, meaning
that the picture can be enlarged further.
To Next Page
Loading...
