Panasonic MCDLT35BM - Page 103

No.SX-DSV03335
Cate
Pr.
Parameter
Defaul
t
value
Cate
Pr.
Parameter
Defaul
t
value
Cate
Pr.
Parameter
Defaul
t
value
Cate
Pr.
Parameter
Defaul
t
value
Cate
Pr.
Parameter
Defaul
t
value
2
0 Adaptive filter mode setup
02
31 For Manufacturer use
0
1 1st notch frequency
5000
32 For Manufacturer use
0
2 1st notchwidth selection
2
33 For Manufacturer use
0
3 1st notch depth selection
0
34 For Manufacturer use
0
4 2nd notch frequency
5000
35 For Manufacturer use
0
5 2nd notch width selection
2
36 For Manufacturer use
0
6 2nd notch depth selection
0
37 For Manufacturer use
0
7 3rd notch frequency
5000
8 3rd notch width selection
2
9 3rd notch depth selection
0
10 4th notch frequency
5000
11 4th notch width selection
2
12 4th notch depth selection
0
13
Selection of damping filter
switchin
g
0
14
*
1
1st damping frequency
0
15
*
1
1st damping filter setup
0
16
*
1
2nd damping frequency
0
17
*
1
2nd damping filter setup
0
18
*
1
3rd damping frequency
0
19
*
1
3rd damping filter setup
0
20
*
1
4th damping frequency
0
21
*
1
4th damping filter setup
0
22
*
1
Command smoothing filter
Size A-C 9.2
Size D-H 13.9
23
*
1
Command FIR filter
1.0
24 5th notch frequency
5000
25 5th notch width selection
2
26 5th notch depth selection
0
27 1st damping width setting
0
28 2nd damping width setting
0
29 3rd damping width setting
0
30 4th damping width setting
0
*1 When checking directly value of parameter-file with a text data etc., it does not show the decimal point. Ex) Pr6.24 Load change compensation filter ･･･ Value of Panaterm ： 0.53 / Value of parameter-file ： 53
* Parameter names in the table correspond to the DD motor (rotary type). For parameter names and setting values corresponding to linear motors, refer to the technical document.
3/11
PARAMETER MODEL MINAS-A6B(BL/BM) series