Panasonic NV-DV2000 - Assemble; Disassemble Procedures of Slot-In Unit

http://cxema.ru
3.1.3. Assemble/ Disassemble Procedures of Slot-in Unit
3.1.3.1. Disassemble Section
Before proceeding the disassembling of the Slot-in unit, remove the mechanism unit from the chassis and
remove the DIGITAL C.B.A. from the mechanism by referring the disassemble procedure describing in the
previous section.
No. ITEM/PART FIGURE REMARKS
11 SLOT-IN
UNIT/MOTOR
ANGLE/WORM
WHEEL
Fig.
D9-1
Fig.
D9-2
2-Screws (N-1)
4-Screws (N-2)
12
INTERMEDIATE
GEAR
Fig. D10
1-Cut washer (q)
13 SYNCHRO
-GEAR
Fig. D11
1-Hook (r)
14 OUTER SIDE
PLATE-T
Fig. D12
4-Screws (O)
15 SUB
RACK/T-MAIN
RACK
Fig. D13
16
INTERMEDIATE
GEAR
Fig. D14
1-Cut washer (s)
17 GUARD
BLOCK /
SPINDLE
SHAFT (I)
Fig. D15
Slide the guard block to
arrow direction.