Infra-red Remote Controller
1
REW (REWIND)
In the stop mode:
In the playback mode:
In the rewind mode:
"<<" is lit.
To rewind the tape.
To search backward.
To obtain high speed picture.
2
SEARCH
To adjust the playback speed backward or forward.
23
3
DISPLAY
To change the indication on the VTR Display.
Clock-Counter--Remaining Tape Time
4
RESET
To reset the tape counter (elapsed time) to "0:00.00".
*The tape counter is automatically reset to "0:00.00"
when a video cassette is inserted.
5
INDEX
For the index search function.
6
REPEAT
For the repeat playback function.
7
AUDIO OUT
To select the desired sound mode.
At the every push of this button, the audio output mode
changes as follows.
--4StereoLeft---›Right—›Normal audio track
and the Left and Right Indicators show which sound
mode is selected in the following way.
Stereo: Both the Left and Right Indicators are lit.
Left:
The Left Indicator is lit.
Right:
The Right Indicator is lit.
Normal: Both the Left and Right Indicators are not lit.
8
PROG
For timer recording by using the remote controller.
9
NEXT
To proceed to the next item during setting procedure.
10
RECORDING SP/LP
To select the tape speed desired for recording.
SP gives the best picture quality.
LP gives the longest recording time.
11
CANCEL
To cancel the settings made for a timer recording.
12
Bar Code Reading Section
After the Bar Code Reader is turned on, the tip lights in
red.
1
3
Programme Position Selector Buttons
•
To
select the programme positions.
MO
-
SA
9:
C)
.
SU
MO
-
SA
19:
— (:) —
•
To programme a timer recording.
12
To Next Page
Loading...
