Panasonic NV-HD100A - Audio Dubbing

1
Search for the starting point for audio
dubbing.
2
PAUSE/
STILL
11
Press
PAUSE/STILL
at the starting point.
3
AUDIO
DUB
O
Set for audio dubbing by pressing
AUDIO
DUB.
4
PAUSE/
STILL
11
Start recording the new sound by pressing
PAUSE/STILL.
•
Stop recording by pressing
STOP.
Audio Dubbing
This enables you to record new sound on a previously
recorded tape.
Preparation
• Insert
a recorded cassette with an intact erasure
prevention tab.
•
Select the video source required by pressing
INPUT
SELECT to set A1.
2
00
JnJJ.ti
J
3
0.
A.DUB
4
r>
A.DUB
J JN.PJ - :. PJ
crrrt.rrcrr
JJ -
DJJJ'
Operations 
Display Symbols
Note:
The new sound will be recorded on the normal sound track
of the tape, and the original sound will remain on the Hi-Fi
sound track. Only monaural sound recording is possible on
the normal sound track.
To hear the new sound, select the normal sound track by
pressing
AUDIO OUT.
To hear the new sound and original sound mixed together,
set
Hi-Fi/NORMAL MIX
to ON.
24